[Esapi-user] Differences between ESAPI 2.0_rc11and rc10

Chris Schmidt chris.schmidt at owasp.org
Thu Apr 7 10:42:50 EDT 2011


That assumption is correct Irial

On 4/7/2011 8:39 AM, Irial Conroy wrote:
> Hi guys,
>
> Yeah, I can see that changelog.html file.
>
> It details 'Changes between 2010-10-20 and 2011-03-27'.
> Can I assume that equates to changes between rc11 and rc10 ?
>
> Regards,
> Irial
>
> Irial Conroy
> Software Engineer
> IBM, Galway Research&  Development Lab
> tel: 353-91-570689
> email: irialcon at ie.ibm.com
>
> IBM Ireland Product Distribution Limited registered in Ireland with number
> 92815. Registered office: Oldbrook House, 24-32 Pembroke Road, Ballsbridge,
> Dublin 4.
>
>
>
> From:       Chris Schmidt<chrisisbeef at gmail.com>
> To:         "Kevin W. Wall"<kevin.w.wall at gmail.com>
> Cc:         Irial Conroy/Ireland/IBM at IBMIE, "esapi-user at lists.owasp.org"
>              <esapi-user at lists.owasp.org>
> Date:       07/04/2011 15:11
> Subject:    Re: [Esapi-user] Differences between ESAPI 2.0_rc11and rc10
> Sent by:    esapi-user-bounces at lists.owasp.org
>
>
>
> That's my bad - however if you download the zip, and point your browser at
> the extracted site dir, you will find an HTML formatted changelist built
> from svn
>
> Sent from my iPwn
>
> On Apr 7, 2011, at 7:00 AM, "Kevin W. Wall"<kevin.w.wall at gmail.com>  wrote:
>
>> On 04/07/2011 06:45 AM, Irial Conroy wrote:
>>> Thanks Kevin,
>>>
>>> However, in order to use rc11 I need to go through a formal approval
>>> process
>>> So I need the full list of changes.
>> Understood. See below to see if this helps. If not, email me off list.
>>
>>> If they are not currently listed womehere I'm presuming I may have to
> step
>>> through the following:
>>> http://code.google.com/p/owasp-esapi-java/source/list
>>> ..but I'd prefer not to have to!
>> Hmmm... usually Jim or Chris at a CHANGELOG to the zip distribution
>> file, but I see it's not there this time.
>>
>> If you have Subversion installed on one of your systems where you
>> can access it from the *nix shell, you can get a crude CHANGELOG
>> like this:
>>
>>         # Date 2,0rc10 was released
>>     startDate=2010-10-18
>>         # Date 2.0rc11 was released
>>     endDate=2011-03-27
>>     svn log -v -r{"${startDate} 00:00:00"}:{"${endDate} 00:00:00"} \
>>         http://owasp-esapi-java.googlecode.com/svn/trunk/
>>
>> The formatting is a bit crude, but that will show you all commits
>> betw rc10 and rc11, including the commit comments. (Irial: Note, if you
> don't
>> have a place where you can access SVN from the command line, let me know
>> off-list and I'll run it for you and send it to you in a private email.)
>>
>>
>> Jim, Chris: Should we perhaps just upload a crude CHANGELOG and call it
>>     something like esapi-2.0_rc11.CHANGELOG.txt, or is the change log
>>     in one of the other distro files that I didn't look in, such as the
>>     esapi-2.0_rc11-config.zip file???  IMO, we really should be doing this
>>     AND "release notes" which summarizes the major changes.
>>
>> HTH,
>> -kevin
>> --
>> Kevin W. Wall
>> "The most likely way for the world to be destroyed, most experts agree,
>> is by accident. That's where we come in; we're computer professionals.
>> We cause accidents."        -- Nathaniel Borenstein, co-creator of MIME
>> _______________________________________________
>> Esapi-user mailing list
>> Esapi-user at lists.owasp.org
>> https://lists.owasp.org/mailman/listinfo/esapi-user
> _______________________________________________
> Esapi-user mailing list
> Esapi-user at lists.owasp.org
> https://lists.owasp.org/mailman/listinfo/esapi-user
>
>
> _______________________________________________
> Esapi-user mailing list
> Esapi-user at lists.owasp.org
> https://lists.owasp.org/mailman/listinfo/esapi-user



More information about the Esapi-user mailing list